(toppers-users 4492) Re: English Version of target SoCFPGA

[Daniel Sangorrin]

That's right!
On Jan 15, 2016 4:43 AM, "Jonathan Sherman" <jonmsherman08 ＠ gmail.com> wrote:

> Thank you for your response,
>
> From my understanding, I should be able to get Android + SafeG 1.0 working
> on my Xilinx ZC702 Board.  First I Should get Android working on the board,
> and then patch the linux kernel? and then install Safe-G 1.0 onto the same
> partition as Android?
>
> On Thu, Jan 14, 2016 at 5:22 AM, Daniel Sangorrin <
> daniel.sangorrin ＠ gmail.com> wrote:
>
>> Hi Jonathan,
>>
>> > From my understanding, It is only possible to get Android running using
>> the
>> > newest SafeG version?
>>
>> No, not at all. You can run Android with mostly any version of SafeG
>> if it supports your board.
>>
>> > I also have a Xilinx ZC702 Board running SafeG-1.0,
>> > there's no way SafeG can work for that board?
>>
>> Yes, there is. You can run SafeG 1.0 on Xilinx ZC702 and Zedboard. If
>> you have any problem let me know. In fact, that is the latest version
>> that supports the ZC702 SoC. You can also run SafeG 1.0 on QEMU which
>> is useful for debugging.
>>
>> Thanks,
>> Daniel
>>
>> > On Wed, Jan 13, 2016 at 6:06 AM, Daniel Sangorrin
>> > <daniel.sangorrin ＠ gmail.com> wrote:
>> >>
>> >> Hi Jonathan,
>> >>
>> >> I will assume that you are talking about
>> >> "safeg/doc/jp/socfpga/README.txt".
>> >> # Perhaps professor Honda can confirm whether there is an English
>> >> version or not.
>> >>
>> >> If you take a look at the document the important information is already
>> >> written in English (just skip the Japanese). For small details, please
>> use
>> >> Google translate or ask here.
>> >>
>> >> I'd suggest you to start with the prebuilt binaries. Prepare your
>> SDCard
>> >> as
>> >> indicated in the following site:
>> >>
>> >>
>> >>
>> http://www.rocketboards.org/foswiki/Documentation/AlteraSoCDevelopmentBoardSoftwareGettingStarted
>> >>
>> >> Then copy the prebuilt binaries from
>> >> http://toppers.jp/download.cgi/safeg_socfpga-20131203.tar.gz
>> >>
>> >> Follow the README.txt included with the prebuilt binary package to
>> >> load them into
>> >> memory (see below).
>> >>
>> >> Case 1) Trust FMP kernel vs Non-Trusted FMP kernel
>> >>
>> >>  mmc rescan
>> >>  fatload mmc 0:1 0x3f000000 monitor.bin
>> >>  fatload mmc 0:1 0x3f100000 fmp_t_sample1.bin
>> >>  fatload mmc 0:1 0x01000040 fmp_nt_sample1.bin
>> >>  go 0x3f000000
>> >>
>> >> Case 2) Trust FMP kernel vs Non-Trusted Linux
>> >>
>> >>  mmc rescan
>> >>  fatload mmc 0:1 0x3f000000 monitor.bin
>> >>  fatload mmc 0:1 0x3f100000 fmp_t_com.bin
>> >>  fatload mmc 0:1 0x01000040 u-boot_nt.bin
>> >>  go 0x3f000000
>> >>
>> >> [Note] Use these commands on the non-trust u-boot:
>> >>
>> >> mmc rescan;
>> >> fatload mmc 0:1 0x7fc0 uImage_nt;
>> >> fatload mmc 0:1 0x00000100 socfpga.dtb;
>> >> setenv bootargs console=ttyS0,57600 mem=1000M root=/dev/mmcblk0p2 rw
>> >> rootwait;
>> >> bootm 0x7fc0 - 0x00000100
>> >>
>> >>
>> >> Regarding Android documentation, SafeG only cares about the kernel.
>> It's
>> >> mostly
>> >> agnostic to the userland binaries that you run (e.g. dalvik or
>> >> zygote). The Linux kernel needs
>> >> to be patched so that some configuration is done in Trust mode. You can
>> >> see the
>> >> patches for the kernel version 3.10.31
>> >> (http://git.rocketboards.org/linux-socfpga.git)
>> >> under the directory "safeg/patches/target/socfpga/"
>> >>
>> >> - 1_NT_linux_l2.patch (Required)
>> >> - 2_NT_linux_com.patch (Optional, only if you want COM the dual-OS
>> >> communications module)
>> >>
>> >> So basically, you would have to first get Android running on your
>> board,
>> >> and
>> >> then patch its kernel with 1_NT_linux_l2.patch.
>> >>
>> >> Thanks,
>> >> Daniel
>> >>
>> >>
>> >>
>> >> On Wed, Jan 13, 2016 at 1:16 PM, Jonathan Sherman
>> >> <jonmsherman08 ＠ gmail.com> wrote:
>> >> > I was wondering if there was an english version for the target
>> >> > README.txt
>> >> > file for the Altera SoCFPGA?  Also, is there any documentation
>> regarding
>> >> > Android?
>> >
>> >
>>
>
>
-------------- next part --------------
HTML$B$NE:IU%U%!%$%k$rJ]4I$7$^$7$?(B...
URL: <http://www.toppers.jp/pipermail/users/attachments/20160115/aceea38f/attachment.html>